Field Tools: Field Tools | Inspection Forms |Misc |
Reference Cards

Center of Gravity Magnetic Logo

By Training & Inspection Resource Center

3.75"
black and white
Magnetic CG logo sticks to steel or can be used with sticky tack. Excellent focal point while training or performing live rigging activities.

Rigging Gear Inspection Tool
Pack
By Training & Inspection Resource Center

4"x 4"x 8" Nylon fanny pack with tools Contains:
4" Calipers
8" Marlin Spike
Microscope
Tape Measure
1/4" to 1 1/2" Sheave Gauge
1/4" to 1 1/4" Chain Gauges

All in a fanny pack for easy transport.

Crosby Tie Down Calculator
By The Crosby Group

3.5"x6.5"
This slide rule was developed in cooperation with Commercial Vehicle Safety Alliance (CVSA). Provides assistance in determining proper equipment to be used in tie down applications.

E-Z-Out^TM Knife

By Gerber Legendary Blades

4.5" folded
The high carbon, stainless steel blade comes with either a fine edge or a 1/2 serrated edge. This one–hand opening knife utilizes a lightweight, fiberglass–filled nylon handle with nonslip inserts to ensure a secure grip.

Forklift Inspector Tool Pack 

By Training & Inspection Resource Center

4"x 4"x 8" Nylon fanny pack with tools
Contains:
Tape Measure
Forklift Caliper

Forklift Chain Gauge

Angle Finder/Protractor

All in a fanny pack for easy transport.

Individually Purchased Items 

Forklift Caliper

By LoadArm Australia Pty, Limited

The caliper was designed as a tool for inspecting critical load bearing areas of a fork arm (shank and blade) for wear. It also comes with instructions that provide guidance about maintenance and the operation of fork arms.

Forklift Chain Gauge

By Total Source

The chain gauge was designed to measure the wear or elongation of the chain links on a forklift.

Angle Finder/Protractor

By Empire

The angle finder is able to transfer angles within 1˚, it is easy to read and has a built-in angle pitch calculator on the back.

Diamond Knife Sharpener

By Gerber Legendary Blades

5.5" closed
This sharpener with pocket clip, retracts into its handle for easy accessibility and is great for putting a quick edge on your blade while in the field. Easy to use. Keeps knives razor sharp.

Needlenose Multi–Lock ^TM Tool

By Gerber Legendary Blades

5.5" closed
Lifetime Warranty
Each component of this stainless steel tool opens independent of any other, locks tightly against a roll bar and stays tight until you unlock it. Includes a ballistic cloth belt sheath.

Kestrel 2000 Pocket Thermo Wind Meter

By Nielsen-Kellerman

5"x2.5"
Includes slip–on hard cover, neck lanyard & battery.
Because weather can play a major role when orchestrating a lift, this tool is a must have for both the crane operator as well as the rigger. Quickly measures current wind speed, maximum wind speed, average wind speed, temperature and wind chill. Units can be read in knots, meters per second, kilometers per hour, miles per hour, feet per minute, Beaufort Force, and ºC & ºF. Accuracy: +/– 3% wind speed, +/– 1.0ºC temperature.

Metal Sheave Gauges

By Wire Rope Corporation of America

Heavy duty metal sheave gauges are durable enough to withstand repeated use. Long-lasting, chemical and weather resistant. 14 gauges ranging in size from .25" to 1.5", or 1.25" to 2.5" in diameter.

Rigger's Knife With Locking Marlin Spike

By Catalina

4.5" folded
You get 2 tools in one! This handy knife comes with a 3" locking marlin spike on one end and a stainless steel sheepsfoot plain edge blade on the other end. Also included is a steel hook for easy attachment to belts or tool pouches. Made of 440 Stainless Steel.

Plastic Metric Sheave Gauge

By Training & Inspection Resource Center

19 gauges from 6mm to 38mm
Resilient plastic metric sheave gauge set.

Field Tools: Field Tools | Inspection Forms | Misc | Reference Cards